Pal Aluminum Dead End Clamp
The clamps are designed for different messenger cross sections suitable for various climatic conditions. The clamps are easy to install without tools and available for both bracket and hook installation to wooden, concrete or steel poles. Clamps a...
Pa Dead End Clamp
This Conical wedge clamp composed of an opened thermoplastic body with very high mechanical and climatic resistance, an inner sheath consisting one or two insulating plastic wedges ensuring the clamping of the neutral messenger without damaging cab...
Tha Thb Anchor Clamp
Material: Mild steel, nylon plus fiber glass Product property:THA is used to fix 2 or 4-core typically between the pole and the fascia board. The unique design of plastic clamp enables the cable direction to be a 90degree opposite configuration if r...
Nes Tension Clamps For Bundle Insulating Conductors
NES four core collecting strain clamp is suitable for the end of aerial wire terminal, it’s action is fixing or tightening the insulation conductor. The clamphas been designed four core parallel groove, after clamping the four insulation conductor,( ...
Tension Clamps For Insulating Conductor Nxj-b-nxj
Tension clamps for insulating conductor Application NXJ aerial insulation wedge type tension clamp is a kind of anchor clamp in distribution line. It is applicable for fastening of aerial insulated conductor on the corner or terminal wire pole. The p...
Thko Four Core Collecting Dead End Clamp
Clamps used to anchor fastenings for self-supporing insulated conductor with four bearing wires of identical section. They are used supporing insulated aerial cable. Constructions of THKO clamp: * Reinforced polyamide fibre glass body * Two clamping ...
Thkp Two Or Four Core Collection Dead End Clamp
Ptg Cover Plate Tension Clamps
This type is particularly characterized by its lightweight since both the connecting piece and the wedges are made of glass fiber reinforced plastic. Another advantage is the straight cable inlet, ensuring that no damage will occur to the conductor ...
Pag Bolted Type Dead End Clamp
The clamps are designed to anchor self-supporting LV-ABC lines 4 cores. The wedge type clamp is self-adjusting and it was made of high high mechanical and climatic resistant insulating material ensuring a good stress repartition on bundle without da...